Gamma X-Stringer X-ST STRINGING MACHINE (Issue 2 - Octob Manuel d'utilisateur télécharger pdf (Page 6)

5

ASSEMBLY INSTRUCTIONS

Setting the Gripper Jaw Spacing

The gripper jaws of the tensioner are adjust-

able to accomodate varying string gauges.

If the string slips through the gripper jaws

while pulling tension, rotate the gripper jaw

adjustment screw counter-clockwise.

If the string is damaged while pulling tension,

rotate the gripper jaw adjustment screw

clockwise.

The jaws will be properly adjusted when

there is enough pressure to securely grip the

string without causing damage to the string.

Travel Stop

Tensioner Travel Stop

The tensioner bar is equipped with a

tensioner travel stop to limit travel of the

tensioner along the bar and prevent contact

between the tensioner and the racquet

mounting system while stringing. The travel

stop is located about midpoint along the

tensioner bar below the gear track.

To disengage the stop, pull and hold the knob,

rotate 90 degrees and release. To engage

the stop, repeat the above procedure until

the travel stop pin protrudes beyond the

opposite surface of the tensioner bar.

Turntable Brake

The turntable may be locked in any position.

Flip the lever down to lock the turntable brake

and flip the up to release the turntable brake.

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Commentaires sur ces manuels

Pas de commentaire