Gamma X-Stringer X-6FS STRINGING MACHINE (Issue 1 - May Manuel d'utilisateur télécharger pdf (Page 6)

5

ASSEMBLY INSTRUCTIONS

Adjusting the Frame Support Posts

Loosen the lock bolts of the frame support

posts and space them apart with the frame

support slides separated by the approxi-

mate length of the racquet head. Although it

is not required, it is good practice to center

the support posts on the turntable. Lock one

of the posts in position by tightening the lock

bolt and position the other post until the frame

support slide is positioned near the inside

surface of the racquet frame. Securely

tighten the lock bolt of the second support

post.

Caution: To avoid racquet damage, the

center posts should not contact the racquet

prior to locking down the support posts.

MOUNTING THE FRAME

String Clamp Installation

The post of the string clamp and tube of the

string clamp base are treated with grease to

provide protection against corrosion during

shipping. Remove any excessive grease

with a clean cloth prior to use. The post and

tube may also be cleaned with isopropyl

alcohol. After this type of thorough cleaning,

the post and tube should be treated with a

light coating of machine oil to protect the

surfaces against corrosion and to ensure

smooth operation.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Commentaires sur ces manuels

Pas de commentaire