Gamma X-Stringer X-6FS STRINGING MACHINE (Issue 1 - May Manuel d'utilisateur télécharger pdf (Page 8)

STRINGING THE FRAME

The drop weight is of a two piece design.

When assembled, it will accomodate ten-

sions from 20 lbs. to 90 lbs. For tensions from

8 to 20 lbs., remove the 5mm bolt on the face

of the drop weight, and use the smaller

portion of the weight as described above.

Note: Tensions above 77lbs. require re-

moval of the drop weight bar endcap.

Setting Tension

To set the stringing tension, loosen the

locking knob on the side of the drop weight.

Slide the weight in the appropriate direction

until the face closest to the string gripper is

indexed with the desired tension mark on the

tension bar.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Pas de commentaire

Gamma X-Stringer X-6FS STRINGING MACHINE (Issue 1 - May Manuel d'utilisateur Page 8