Gamma 6004 STRINGING MACHINE 2 POINT SC MOUNTING (Issue Manuel d'utilisateur télécharger pdf (Page 12)

STRINGING THE FRAME

ADDITIONAL FEATURES

Locking the Turntable

The turntable may be locked in any position.

Rotate the lever down to lock the turntable

and up to release the turntable.

Clamping the First Main String

Secure the tensioned main string using the

remaining ﬁ xed clamp. Repeat the procedure

for all of the remaining main strings and

tie off following the racquet manufacturers

recommendations.

Follow the manufacturer’s recommended

stringing pattern for one or two piece

stringing. This will determine the starting

point for the cross strings. If applicable, tie

the ﬁ rst cross string using an appropriate

starting knot.

Weaving the Cross Strings

Weave the cross strings over and under the

main strings being careful to alternate the

weave direction of each consecutive cross

string so as to be opposite of the previously

installed cross string.

Once the ﬁ nal cross string is tensioned

and clamped, tie off at the appropriate hole

speciﬁ ed by the racquet manufacturer. Re-

move the frame from the mounting system

by releasing the racquet holddowns and

loosening the mounting stands.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Gamma 6004 STRINGING MACHINE 2 POINT SC MOUNTING (Issue Manuel d'utilisateur Page 12