Gamma X-Stringer X-6FC STRINGING MACHINE (Issue 4 - Nove Manuel d'utilisateur télécharger pdf (Page 8)

Frame Shoulder Support Arm

Adjustment

Being sure the shoulder supports are free

to swivel in their mountings, simultaneously

rotate the shoulder support adjustment knobs

clockwise until both shoulder supports gently

and squarely contact the frame.

Securing the Frame

Lock the shoulder supports in position by

turning the knob at the base clockwise.

Repeat the adjustment procedure for the

remaining support post.

Re-tighten all of the frame supports in the

same order as before.

Do not overtighten any of the supports as

racquet damage may occur.

The supports should be tightened to the point

where the racquet frame will not move in the

mounting system when the handle is grasped and attempts are made to move it. Should any

supports lose contact with the frame while stringing they should be re-tightened.

MOUNTING THE FRAME

Frame Shoulder Support Adjustment

The shoulder supports are designed to rotate

and can be adjusted to provide maximum

support to the racquet frame. Rotate the

support so that the pads contact the frame

squarely when the arms are closed against

the racquet.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Pas de commentaire

Gamma X-Stringer X-6FC STRINGING MACHINE (Issue 4 - Nove Manuel d'utilisateur Page 8