Gamma X-Stringer X-6FC STRINGING MACHINE (Issue 4 - Nove Manuel d'utilisateur télécharger pdf (Page 11)

11

Gripping the String

While holding the tension bar slightly above

horizontal, wrap the free string clockwise

around the gripper drum once and position

between the gripper jaw.

Gently turn the gripper clockwise while

squeezing the jaws together until all slack

in the string is removed.

Note: For proper operation, the string grip-

per jaw must be in the position shown. The

tension in the string provides the clamping

force to the jaws.

Pulling Tension

While securely holding the string gripper drum

with your hand, lift the tension bar above

horizontal and gently lower the bar under its

own weight. If the tension bar drops below

horizontal, repeat the above action until the

bar comes to rest parallel to the racquet.

When the correct tension is attained, the drop

weight bar will rest horizontally as shown. For

accurate tensioning, it must be lowered and

come to rest at horizontal without assistance.

Manually forcing the tension bar to the hori-

zontal position will greatly increase the string

tension and may result in racquet damage.

If the tension bar comes to rest above hori-

zontal, release the string by lifting the bar

and re-pull the string.

STRINGING THE FRAME

WARNING: TO AVOID INJURY, KEEP FINGERS AWAY

FROM GRIPPER JAWS WHILE TENSIONING STRING.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Commentaires sur ces manuels

Pas de commentaire